1050 Aluminum Plates

Name:	1050 Aluminum Plates

Category: pure aluminum (above AL 99.5%)
Supply status: H24, H14, H12, H26, H18, O...
Thickness: 0.2mm-6mm
Width: 1000/1220/1250/1500/2000mm
Length: 2000/2440/2500/3000/6000mm

Product Description

1050 Aluminum Alloy Plate, Pipes, Tubes, Rods, Profiles and Fabrications

SaTraD Group – China’s Top leading steel, metal & raw material distributor.

1050 is a product of pure aluminum plate series, and the chemical composition and mechanical properties are similar as 1060 series. It is basically replaced by 1060 in current applications. The last two Arabic numerals of the 1050 series are 50. According to the international brand naming principle, the aluminum content must reach 99.5% or more to be a qualified product. Because it does not contain other technical elements, the production process is relatively simple and the price is relatively cheap. It is currently the most commonly used series in conventional industries. Industrial pure aluminum has the characteristics of high plasticity, corrosion resistance, good electrical and thermal conductivity, but low strength. It is not strengthened by heat treatment and has poor machinability. It can accept contact welding and gas welding.

Application

1050 is widely used in daily necessities, lighting appliances, reflectors, decorations, chemical industry containers, heat sinks, signs, electronics, lamps, nameplates, electrical appliances, stamping parts and other products. In some occasions that require high corrosion resistance and formability, but not high requirements for strength, chemical equipment is its typical use.

Specification of 1050 Aluminum Alloy

Material Grade	1050、1060、2A12、2024、2017、LY12、3003、3A21、LF21、5052、5083、5A02、5A05、5A06、LF2、LF5、LF6、6061、6063、6082、7075、7050、7A04、7A09、LC4、LC9, etc.
Color	Nature, silver, bronze, champagne, black, gloden, etc. As customized
Standard	DIN GB ISO JIS ASTM
Thickness	0.2-6mm
Width/Length	Width: 1000/1220/1250/1500/2000mm Length: 2000/2440/2500/3000/6000mm
Surface Treatment	Mill finish, Anodized, Electrophoresis, Powder coating, Wooden grain, Sand blast
Typical Use	billboards, building exterior decoration, vehicle bodywork, high-rise and factory wall decoration, kitchen sinks, lamp holders, fan blades, electronic parts, chemical instruments, sheet metal processing parts, deep-drawn or spinning concave utensils, Welding parts, heat exchangers, clocks and panels, famous brands, kitchenware, decorations, reflective appliances, etc..

Chemical Composition of 1050 Aluminum Alloy

Alloy Grade	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Zr	Al
1050	0.25	0.40	0.05	0.05	0.05	-	0.05	0.03	-	99.5

Mechanical & Physical Properties of 1050 Aluminum Alloy

Material Grade

Tensile Strength

Yield Strength

Elongation

Hardness

Thermal

Expansion

Melting point

Conductivity

20℃（68℉）

Resistivity 20℃（68℉）

Density

Rm/Mpa

Rp0.2/Mpa

HBWα

200-100 ℃μm/mk

℃

（%IACS）

68℉ Ωmm²/m

20℃g/cm³

1050-H24

105-145

23.6

646-657

61.3

0.0281

2.71

【Print】

Pre: Next: None /div>