5A05 Aluminum Plates

Name:	5A05 Aluminum Plates

Category: super anti-rust military aluminum alloy
Type: ordinary aluminum plate, bright aluminum plate, brushed aluminum plate, film aluminum plate...
Supply status: H112, O...
Thickness: 1mm-150mm
Width: 1250/1500mm
Length: 2500/3000/4000mm

Product Description

5A05 Aluminum Alloy Plate, Pipes, Tubes, Rods, Profiles and Fabrications

SaTraD Group – China’s Top leading steel, metal & raw material distributor.

5A05 This is an alloy of aluminum and magnesium with low strength. It does not respond to hardening by heat treatment. The alloy has good corrosion resistance and acceptable weldability. It is suitable for spot welding, atomic hydrogen welding, gas welding, and argon arc welding. The machinability is poor in the reverse state, and the semi-cold hardening state is well.

Cold deformation of the alloy can increase strength, but reduce plasticity. The plasticity in the annealed state is higher, and the plasticity in the semi-cold hardened state is acceptable.

Applications

5A05 AL-MG series alloy is usually used to manufacture welded pipelines, welded fuel tanks and other liquid containers, and other parts that require high process plasticity, good corrosion resistance, and medium load; Alloy wire rods and rivets need to be anodized. Similar like 5456 alloys, LF5 5A05 alloys are commonly used in the manufacturer of armor plate, high strength structural parts, storage tanks, pressure vessels and parts of marine products, etc.

Specification of 5A05 Aluminum Alloy

Material Grade	1050、1060、2A12、2024、2017、LY12、3003、3A21、LF21、5052、5083、5A02、5A05、5A06、LF2、LF5、LF6、6061、6063、6082、7075、7050、7A04、7A09、LC4、LC9, etc.
Color	Nature, silver, bronze, champagne, black, gloden, etc. As customized
Standard	DIN GB ISO JIS ASTM
Thickness	1-150mm
	Width: 1250/1500mm Length: 2500/3000/4000mm
Surface Treatment	Mill finish, Anodized, Electrophoresis, Powder coating, Wooden grain, Sand blast
Typical Use	commonly used in the manufacturer of armor plate, high strength structural parts, storage tanks, pressure vessels and parts of marine products

Chemical Composition of 5A05 Aluminum Alloy

Alloy Grade	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Zr	Al
5A05/LF5	0.50	0.50	0.10	0.3-0.6	4.8-5.5	-	0.20	-	-	Balance

Mechanical & Physical Properties of 5A05 Aluminum Alloy

Material Grade	Tensile Strength	Yield Strength	Elongation	Hardness
5A05-H112	Rm/Mpa	Rp0.2/Mpa	%	HBWα
5A05-H112	265	115	14	-

【Print】

Pre: Next: [Next : ]→ /div>